"The Curve Industries High Side Steering system or HSS is finally in production. It's been in R&D with us for 3 years now and we've hit the nail on the head. High Side Steering is a patented, active anti roll system that loads the outside ski and unloads the inside ski causing the sled to lean into a corner. This occurs through a series of linkages driven by the OEM steering system. The existing shock location is converted to a pivot fulcrum and the shock bolts to a primary pivot arm which is a dynamic mount. As the bars are turned in either direction, the dynamic mount pushes the shock down to preload or pulls the shock up to unload. Cornering performance goes through the roof and off trail capabilities such as side-hilling are greatly increased due to the nature of the system to 'dig in'. If you ride 2 up frequently or have a touring sled, the stability benefits are just as great as you may imagine. With HSS, you can effectively run less ski pressure, less aggressive skis and gain performance equal to a highly modified ski / sway bar / suspension but with near OEM steering effort and without 10" carbides. There is ZERO unwanted handle bar feedback, the system is completely rebuildable and 100% made in the USA except for some hardware components. Total added weight after removing the OEM sway bar is only a few pounds. The completely bolt on installation is simple with no permanent modifications other than cutouts in the plastic for the primary pivot arms. " Pätevän näkönen tsydeemi, tilanpuute voi kyllä vaivata kuomun alla. Tossa proto "10 Crossfiressä: http://www.youtube.com/watch?v=WKfHpcb9EOo&feature=youtu.be
