Yamaha phazer 07 vikakoodit

Keskustelun 'Esitteet, videot ja tekniset tiedot.' on aloittanut käyttäjä carrillo, 13/11/14.

  1. carrillo

    carrillo Well-Known Member

    Laitetaampa tänne kun jatkuvasti niitä joku kaipailee tuolla yamaha osiolla vaikka neet on sielläkin 8)

    CODE

    Code 11: Cylinder identification sensor or circuit problem.

    Code 12: Crankshaft sensor or circuit problem

    Code 13: Intake pressure sensor or circuit problem on Cylinder #1.

    Code 25: Intake pressure sensor or circuit problem on Cylinder #2.

    Code 14: Intake pressure sensor hose problem. Hose is detached, loose, plugged, pinched, etc on Cylinder #1.

    Code 26: Intake pressure sensor hose problem. Hose is detached, loose, plugged, pinched, etc on Cylinder #2.

    Code 15: Throttle position sensor or circuit problem.

    Code 16: Throttle position sensor is not moving.

    Code 21: Coolant temp sensor or circuit problem.

    Code 22: Intake temp sensor or circuit problem.

    Code 30: Oil pressure sensor or circuit senses low engine oil pressure. ECU turns off main relay and stops engine.

    Code 33: Open circuit in the primary circuit of the Cylidner #1 ignition coil.

    Code 34: Open circuit in the primary circuit of the Cylinder #2 ignition coil.

    Code 42: Speed sensor or circuit problem.

    Code 43: ECU unable to monitor system voltage due to an open or short circuit in fuel system circuit.

    Code 44: Internal ECU problem with CO setting or adjustment mode.

    Code 46: System voltage is too high or too low.

    Code 50: ECU internal memory or data problem.

    Code 65: Knock sensor or circuit problem.

    Code 81: Grip warmer open or short circuit.

    Code 83: Thum warmer open or short circuit.

    Code 84: TORS system has been activated.

    Code 85: Short or open circuit in oil pressure switch.

    Code 88: Short or open circuit in reverse indicator switch.
     

Suosittele tätä sivua